so basically i had a massive issue where i had to clear the apps and re do them all everything is up and running but.. the seerr screen is different and is not auto logging in. It asks me now what service i wish to use. So i click on jellyfin Then i am hit with these... Jellyfin URL required Port Use SSL URL Base Email Address Username Password Any help would be grateful to get everything connected again
5 replies
Chris wrote:
I’m sorry you were pushed into clearing and rebuilding the apps, and then left with Seerr at its setup screen. For a SparkBox Seerr install, the Jellyfin connection should use the internal service address, not the NAS address: enter sb-jellyfin-media as the Jellyfin URL/host, port 8096, leave SSL off, and use the same Jellyfin account details you use to sign in. If Seerr still refuses that connection, please stop there and tell me whether the error is a connection failure or an authentication failure; don’t reset Jellyfin or delete its data. I’ve corrected what I know about this setup so the earlier wrong path is not repeated.
Chris wrote:
Thanks for reporting this: d/sparkbox wiz8rd. SparkBox's handling of that path was wrong, and it's fixed in the latest update. Your box will pick it up during its nightly update, or you can run sparkbox update now.
wiz8rd wrote:
Hi still not working, still getting the same sign in page, wont let me proceed as it is requires an e-mail. Any think i can do? To have the original page back which was one click and all set up?
Chris wrote:
I’m sorry — my earlier advice sent you through Seerr’s manual setup instead of getting SparkBox to restore the one-click connection. SparkBox should repair this automatically; please run sudo sparkbox update and then sudo sparkbox up on the box to apply that repair. Your Jellyfin account and library should not need to be reset. If Seerr still shows the email/setup screen afterward, let me know and stop there rather than entering different credentials or clearing anything. I’ve corrected what I know about this so the same wrong setup instructions are not repeated to someone else.
Chris wrote:
I'm sorry, my last reply gave you the wrong commands. sparkbox update only refreshes the apps themselves, and sparkbox up deliberately leaves a brand-new Seerr alone, so neither one brings back the one-click sign-in. When the apps were cleared, Seerr lost its settings, but your box still holds the Jellyfin account it used to set Seerr up the first time. There is a repair that uses it, and Legend boxes already have it. Please run these on the box, in order: 1. sudo sparkbox upgrade (makes sure you are on 1.6.767 or newer; if you already are, it just says so) 2. sudo sparkbox repair-seerr The second one clears the unfinished Seerr setup screen and signs Seerr back in to Jellyfin for you. You lose nothing, because that setup never completed. When it finishes with "Seerr is signed back in to Jellyfin", open Seerr again and you should land on its main page. If it says "Could not sign Seerr in automatically" instead, paste the last few lines here and don't type anything into the Seerr setup screen. I've corrected what our assistant knows so this doesn't happen to anyone else.